Does Eco-Cool Roof
work on all roofing surface types?
Eco-Cool Roof is specifically designed to work on both low sloped and
steep sloped roofing surfaces. Eco-Cool Roof 5000 exhibits extraordinary adhesion and performance on concrete and metal
roofing, and it also is ideally suited to be used as a top coat over polyurea aromatic spray systems.
Does
Eco-Cool Roof qualify for LEED points if incorporated into a project design?
According to the guidelines set forth
for LEED certification by the United States Building Council, a low sloped roof must exhibit an SRI Value (Solar Reflectance
Index) > 78 to qualify for Sustainable Site Credit 7.2: Heat Island Effect: Roof. Eco-Cool Roof 5000 exhibits an
SRI Value of 106 far exceeding the USGBC’s guidelines and delivering superior energy efficiency to the structure.
What
energy savings can be expected with Eco-Cool Roof?
In most cases, installing a cool
roofing system will result in superb energy savings. Variables such as existing roofing type (i.e. asphalt, built-up, bare
aluminum, gravel, etc.) and R-Value of sub-roofing insulation will affect the percentage decrease in cooling demand and peak
and off-peak energy consumption. On average, Eco-Cool Roof 5000 will produce a cooling demand reduction by 25-40% in
climate controlled facilities and as much as a 30 degree internal ambient air temperature reduction in un-air conditioned
facilities.
How does Eco-Cool Roof compare to other cool roofing systems?
Eco-Cool
Roof 5000 is one of the most cost-effective cool roofing systems available on the market. Providing up to 40% reduction
in energy consumption at a fraction of the cost of other cool roofing systems such as Single-Ply Thermoplastic systems (TPO
& PVC), Built-Up Roofing (BUR), Foam Roofing Systems or Green vegetative roofs.
Our coating system delivers the most
long-term value for the most economically sensible investment.
Can Eco-Cool Roof resist
persistent standing water?
Although
Eco-Cool Roof achieves best results on low-sloped roofs that permit water to drain from the building’s roof, it is highly
resilient to standing water. The polymer strands of the 100% elastomeric resins that form the base for Platinum Exterior
1000 cure by interlinking virtually creating a woven mesh of coating that is extremely durable and long-lasting.
Does
Eco-Cool Roof help mitigate the Urban Heat Island effect?
The EPA defines a Heat Islands as
areas that occur on the surface and in the atmosphere. On a hot, sunny summer day, the sun can heat dry, exposed urban surfaces,
such as roofs and pavement, to temperatures 50–90°F (27–50°C) hotter than the air, while shaded or moist
surfaces—often in more rural surroundings—remain close to air temperatures. Surface urban heat islands are typically
present day and night, but tend to be strongest during the day when the sun is shining.
Eco-Cool Roof 5000 actively prevents
buildings from absorbing afternoon solar energy, minimizing the ambient air temperature above and around the structure, creating
cooler temperatures in areas that surround the building.
Does Eco-Cool Roof help prevent roof leaks from occurring?
Eco-Cool
Roof 5000 is a 100% pure Elastomeric coating that demonstrates exceptional elongation allowing it to “move” with
the expansion and contraction of the substrate as well as make it ideal to bridge surface cracks to prevent moisture penetration
into the structure.
Does Eco-Cool Roof allow the building to “breathe”, effectively
allowing trapped vapors to escape the structure?
Many cool roofing systems create such an air tight barrier
that moisture and condensation that accumulates within a building is not free to escape through micro-pores in the building’s
envelope. This often permits the growth and proliferation of molds and mildews within interior walls. Eco-Cool Roof 5000 has
an industry leading Perm Rating of 1.34. The product will not permit moisture intrusion from the exterior, but will allow
trapped vapors to escape to the exterior of the building contributing to the prevention mold and mildew growth.
Is
Eco-Cool Roof an eco-friendly product?
Eco-Cool Roof 5000 is a water-based, Zero VOC exterior coating.
Eco-Cool Roof 5000 contains no harmful solvents, only natural water, so it will not off-gas or contribute to the production
of ozone or other air pollutants.
Eco-Cool Roof 5000 actively creates a healthier environment by mitigating the
Urban Heat Island effect and reducing a coated facility’s carbon emissions resulting from energy consumption.
Lastly,
in comparison to other products that rely on overseas suppliers for the raw materials, all the materials used to produce Eco-Cool
Roof 5000 are developed or retrieved within 500 miles of the production facility thus reducing the products Carbon Footprint.
Do
I need special equipment to install Eco-Cool Roof?
Eco-Cool Roof 5000 applies like regular
paint and can be brushed, rolled, or applied with an airless sprayer. To achieve optimal adhesion and performance, ensure
the surface is properly cleaned and free of surface contaminants*.
How long before recoating
with Eco-Cool Roof to maintain optimal performance?
Eco-Cool Roof 5000 is guaranteed
to maintain its performance of a period of ten (10) years; however, many of our customers have received sustained performance
for periods longer than fifteen (15) years.
Where can I learn more about Cool Roofs?
www.coolroofs.com
http://www.epa.gov/heatisland/mitigation/coolroofs.htm